

高精度 · 长途干线
AI-12 光纤熔接机
系列中的高精度机型:0.05 µm 纤芯对准、6 秒电弧、密封光路,专为每 0.1 dB 都要计较的长途干线设计。
- 熔接 / 加热
- 6 s / 15 s
- 对准
- 0.05 µm
- 测试
- OPM + VFL
- 保修
- 5 年(电池与适配器 1 年)
所有设备均按项目单独报价。本站不设在线支付环节——开票前我们会先确认价格、交期与运输方案。
下载用户手册- 长途干线
- 骨干网建设
- 数据中心链路
- 大芯数光缆熔接
0.05 µm 纤芯对准
系列中最严的对准公差,适用于 G.654 以及熔接损耗预算几乎没有余量的长途线路。
三路充电
可在机内充电、取出电池单独充电,或用 USB Type-C 供电——工程队轮班换电池时很实用。
密封光路
电弧腔与 V 型槽防尘防潮,整条线路上的损耗都能保持一致,而不只是前一百个接头。
五年保修
整机五年保修,电池与适配器保修一年。
技术规格
AI-12 技术参数
多语言菜单. 以上数值为厂家标准机型的规格参数。
Basic parameters
| Fiber alignment | Core/cladding |
|---|---|
| Motor number | 6 motors (fiber alignment accuracy: 0.05µm) |
| Splicing time | 6s |
| Heating mode | 15s, can be customised according to the external environment |
| Fiber type | Single-mode fiber (SMF/G.652), multimode fiber (MMF/G.651), dispersion-shifted fiber (DSF/G.653), G.654 fiber, non-zero dispersion-shifted fiber (NZ-DSF/G.655) and bend-insensitive fiber (BIF/G.657); suitable for splicing bare fiber, pigtail, drop fiber, patch cord and invisible fiber |
| Cladding diameter | 80-150µm |
| Splicing loss | 0.02dB (SM) / 0.01dB (MM) / 0.04dB (DS/NZDS) |
| Fiber identification | Automatic fiber recognition (in AUTO mode) |
| Splicing mode | Automatic focusing core alignment, conventional / high precision welding |
| Splicing way | Automatic, semi-automatic |
| Fiber holder | Three in one fixture, no need to change, suitable for single/multi-mode, multi-core cable/bare fiber, tail fiber, jumper, leather cable |
| Battery capacity | 7800mAh large-capacity lithium battery, charging time ≤3.5 hours; continuously welds and heats about 260 cores |
| Magnification | 320x (X or Y axis single display), 200x (X and Y axis dual display) |
| Fiber diameter | Coating diameter: 80-150µm / Coating diameter: 100-1000µm |
| Cutting length | Coating layer 250µm below: 8-16mm / coating layer 250-1000µm: 16mm |
| Heat shrink tube | 60mm / 50mm / 40mm / 25mm |
| Tensile testing | Standard 2N |
| Display | 5-inch color touchscreen |
| Boot time | 1s |
| Data is stored | Unlimited, machine storage 1000 groups, the excess part can be stored in the server, can export data. |
| Wireless communication | Based on bluetooth 4.2 protocol standard, the working band is 2.4GHz, the maximum transmission range is 60m |
| Software upgrade | Mobile phone APP Internet update, enable Bluetooth synchronization upgrade machine software |
| Management function | The equipment owner can be bound as the highest authority, and can remotely view the welding records, welding time, loss, etc. through the mobile phone APP. The number of welding times or working time of the equipment can be set. The manager can effectively manage a single or multiple equipment. |
| Return loss | Better than 60dB |
| Product protection | Waterproof, dustproof and fall proof |
| Charging method | Three charging ports: the battery can be removed for charging, Type-C supports bidirectional charging and discharging (can charge mobile phones), with a maximum power of 45W |
| Power supply | Input AC100-240V 50/60Hz, output DC13.5V/4.8A, the current power mode can be identified, real-time monitoring of the current battery level |
| The work environment | Temperature: -15 ~ +50°C, humidity: < 95%RH (no condensation), working altitude: 0 ~ 5000m, maximum wind speed: ≤15m/s |
| Visual fault locator | Power: 15mW, 2Hz flashing and steady-on mode |
| Optical power meter | Wavelength: 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm / 980nm / 1270nm / 1577nm / 1650nm; measurement range -50+26dBm, absolute error <0.3dB (-50dBm ~ +3dBm range) |
标准配置
箱内清单
- 主机(含电池)
- 高精度光纤切割刀
- 工具包:剥线钳、米勒钳、酒精瓶
- 备用电极与电弧校准光纤
- 三路充电套件与便携箱
- 用户手册、质量合格证、保修卡
电极、切割刀片等耗材可作为备件供应。告知我们你的年熔接量,我们会在报价中配好相应数量。






















为 AI-12 询价
发送数量、目的地与时间要求——我们会在一个工作日内回复报价。


