AI-9 光纤熔接机 — 主力机型 · 中长途干线

主力机型 · 中长途干线

AI-9 光纤熔接机

面向中长距离干线光缆的主力熔接机。5 秒熔接、7800 mAh 电池标称 260 次熔接加热循环,工业级电子设计让多日连续施工保持高出勤率。

熔接 / 加热
5 s / 15 s
对准
Core / cladding
测试
OPM + VFL
保修
5 年(电池与适配器 1 年)

所有设备均按项目单独报价。本站不设在线支付环节——开票前我们会先确认价格、交期与运输方案。

下载用户手册PDF · 15.3 MB · 22 页
  • 干线与城域光缆
  • 电信网络建设
  • 长途线路维护
  • 应急抢修

干线出勤效率

5 秒熔接配合 15 秒加热,在长途线路上就是一天 60 芯和一天 120 芯的差别。

全天续航

7800 mAh 电池约可完成 260 次熔接加热循环,偏远线路整班作业不必带发电机。

恶劣环境下的电子设计

工业级 CPU 与密封熔接腔,在高海拔、沙漠高温和零下低温中都能保持对准精度。

五年保修

系列中最长的保修期;电极与耗材按行业惯例不在保修范围内。

技术规格

AI-9 技术参数

11 种语言. 以上数值为厂家标准机型的规格参数。

Basic parameters

Fiber alignmentCore/cladding
Motor number6 motors
Splicing time5s
Heating mode15s, can be customised according to the external environment
Fiber typeSingle-mode fiber (SMF/G.652, BIF/G.657); suitable for single-mode, multi-mode, bare fiber, tail fiber, drop cable, jumper fiber and leather cable
Cladding diameter80-150µm
Splicing loss0.02dB (SM) / 0.01dB (MM) / 0.04dB (DS/NZDS)
Splicing modeAutomatic focusing core alignment, conventional / high precision welding
Splicing wayAutomatic, semi-automatic
Fiber holderThree in one fixture, no need to change, suitable for single/multi-mode, multi-core cable/bare fiber, tail fiber, jumper, leather cable
Battery capacity7800mAh large-capacity lithium battery, charging time ≤3.5 hours; continuously welds and heats about 260 cores
Magnification300 (X or Y), 150 (X or Y)
Fiber diameterCoating diameter: 80-150µm / Coating diameter: 100-1000µm
Cutting lengthCoating layer 250µm below: 8-16mm / coating layer 250-1000µm: 16mm
Heat shrink tube60mm / 50mm / 40mm / 25mm
Tensile testingStandard 2N
Display5 inch TFT color display screen
External lightingUSB port can be connected with an external LED light, convenient for night construction
Charge mobile deviceThe USB port can charge mobile devices such as mobile phones
Boot time1s, boot can enter the working mode
Data is storedUnlimited, machine storage 1000 groups, the excess part can be stored in the server, can export data.
Wireless communicationBased on bluetooth 4.2 protocol standard, the working band is 2.4GHz, the maximum transmission range is 60m
Software upgradeMobile phone APP Internet update, enable Bluetooth synchronization upgrade machine software
Management functionThe equipment owner can be bound as the highest authority, and can remotely view the welding records, welding time, loss, etc. through the mobile phone APP. The number of welding times or working time of the equipment can be set. The manager can effectively manage a single or multiple equipment.
InterfaceUSB2.0 (Type-A) can be used to connect external LED lights and charge mobile devices
Return lossBetter than 60dB
Product protectionWaterproof, dustproof and fall proof
Power supplyInput AC100-240V 50/60Hz, output DC13.5V/4.8A, the current power mode can be identified, real-time monitoring of the current battery level
The work environmentTemperature: -15 ~ +50°C, humidity: < 95%RH (no condensation), working altitude: 0 ~ 5000m, maximum wind speed: ≤15m/s
Visual fault locatorPower: 15mW, 2Hz flashing and steady-on mode
Optical power meterWavelength: 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm; measurement range -50+26dBm, absolute error <0.3dB (-50dBm ~ +3dBm range)

标准配置

箱内清单

  • 主机(含电池)
  • 高精度光纤切割刀
  • 工具包:剥线钳、米勒钳、酒精瓶
  • 备用电极与电弧校准光纤
  • 电源适配器、背带与肩包
  • 用户手册、质量合格证、保修卡

电极、切割刀片等耗材可作为备件供应。告知我们你的年熔接量,我们会在报价中配好相应数量。

AI-9 随机标准配件
AI-9 详情图 1AI-9 详情图 2AI-9 详情图 3AI-9 详情图 4AI-9 详情图 5AI-9 详情图 6AI-9 详情图 7AI-9 详情图 8AI-9 详情图 9AI-9 详情图 10AI-9 详情图 11AI-9 详情图 12AI-9 详情图 13AI-9 详情图 14AI-9 详情图 15AI-9 详情图 16AI-9 详情图 17AI-9 详情图 18AI-9 详情图 19AI-9 详情图 20AI-9 详情图 21AI-9 详情图 22

为 AI-9 询价

发送数量、目的地与时间要求——我们会在一个工作日内回复报价。

咨询问题

也可以看看

系列中的其他机型

AI-5 Pro 光纤熔接机 — 入门级 · 安防与短距离 FTTH

入门级 · 安防与短距离 FTTH

AI-5 Pro

安防、CCTV 与短距离 FTTH

  • 8 s熔接
  • Core对准
  • 5200 mAh电池
规格
AI-6A+ 光纤熔接机 — 热销机型 · FTTH 与短距离工程

热销机型 · FTTH 与短距离工程

AI-6A+

大批量 FTTH 与短距离工程

  • 8 s熔接
  • 0.3 µm对准
  • 5200 mAh电池
规格
AI-12 光纤熔接机 — 高精度 · 长途干线

高精度 · 长途干线

AI-12

长途干线与 G.654 跨段

  • 6 s熔接
  • 0.05 µm对准
  • 7800 mAh电池
规格

对比全系列 →