AI-6A+ 光纤熔接机 — 热销机型 · FTTH 与短距离工程

热销机型 · FTTH 与短距离工程

AI-6A+ 光纤熔接机

FTTH 与短距离光纤工程的主力销量机型。0.3 µm 纤芯对准、5 英寸触控屏、11 种语言,加上内置 OPM 与 VFL,一台机器覆盖完整的熔接与测试流程。

熔接 / 加热
8 s / 18 s
对准
0.3 µm
测试
OPM + VFL
保修
3 年(电池与适配器 1 年)

所有设备均按项目单独报价。本站不设在线支付环节——开票前我们会先确认价格、交期与运输方案。

下载用户手册PDF · 12.6 MB · 17 页
  • FTTH 与 FTTx 建设
  • 运营商网络维护
  • 短距离链路
  • 安防与监控

熔接与测试一机完成

内置光功率计与可视故障定位仪,做入户光缆和短距离作业时不必再单独带一台手持仪表。

触控操作流程

5 英寸彩色触控屏引导完成光纤处理、电弧与加热设置;11 种系统语言覆盖多数现场班组。

批量验证的机型

系列中部署量最大的机型——FTTH 规模建设、运营商维护和短距离链路最常指定的就是它。

适应现场的机身

防尘、防水、防震,配加热密封熔接腔,在潮湿多尘环境中保持损耗稳定。

技术规格

AI-6A+ 技术参数

11 种语言. 以上数值为厂家标准机型的规格参数。

Basic parameters

Fiber alignmentCore/cladding
Motor number6 motors (fiber alignment accuracy: 0.3µm)
Splicing time8s
Heating mode18s, can be customised according to the external environment
Fiber typeSingle-mode fiber (SMF/G.652, BIF/G.657); suitable for single-mode, multi-mode, bare fiber, tail fiber, drop cable, jumper and invisible fiber fusion
Cladding diameter80-150µm
Splicing loss0.02dB (SM) / 0.01dB (MM) / 0.04dB (DS/NZDS)
Splicing modeAutomatic focusing core alignment, conventional / high precision welding
Splicing wayAutomatic, semi-automatic
Fiber holderThree in one fixture, no need to change, suitable for single/multi-mode, multi-core cable/bare fiber, tail fiber, jumper, leather cable
VFLThe machine comes with power 15mW, 2Hz flashing and steady-on mode
OPMWavelength: 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm / 980nm / 1270nm / 1577nm / 1650nm; measurement range -50+26dBm, absolute error <0.3dB (-50dBm ~ +3dBm range)
Machine system languages10 languages (Chinese, English, French, Russian, Italian, Portuguese, Polish, Spanish, Thai, Arabic)
Battery capacity5200mAh large-capacity lithium battery, charging time ≤3.0 hours; continuously welds and heats about 160 cores
Magnification320x (X or Y axis single display), 200x (X and Y axis dual display)
Fiber diameterCoating diameter: 80-150µm / Coating diameter: 100-1000µm
Cutting lengthCoating layer 250µm below: 8-16mm / coating layer 250-1000µm: 16mm
Heat shrink tube60mm / 50mm / 40mm / 25mm
Tensile testingStandard 2N
Display5 inch TFT color display screen
Boot time1s, boot can enter the working mode
Data is storedUnlimited, machine storage 1000 groups, the excess part can be stored in the server, can export data.
Wireless communicationBased on bluetooth 4.2 protocol standard, the working band is 2.4GHz, the maximum transmission range is 60m
Software upgradeMobile phone APP Internet update, enable Bluetooth synchronization upgrade machine software
Management functionThe equipment owner can be bound as the highest authority, and can remotely view the welding records, welding time, loss, etc. through the mobile phone APP. The number of welding times or working time of the equipment can be set. The manager can effectively manage a single or multiple equipment.
Return lossBetter than 60dB
Product protectionWaterproof, dustproof and fall proof
Power supplyInput AC100-240V 50/60Hz, output DC13.5V/4.8A, the current power mode can be identified, real-time monitoring of the current battery level
The work environmentTemperature: -15 ~ +50°C, humidity: < 95%RH (no condensation), working altitude: 0 ~ 5000m, maximum wind speed: ≤15m/s

标准配置

箱内清单

  • 主机(含电池)
  • 光纤切割刀
  • 工具包:剥线钳、米勒钳、酒精瓶
  • 备用电极与电弧校准光纤
  • 电源适配器与背带
  • 用户手册、质量合格证、保修卡

电极、切割刀片等耗材可作为备件供应。告知我们你的年熔接量,我们会在报价中配好相应数量。

AI-6A+ 随机标准配件
AI-6A+ 详情图 1AI-6A+ 详情图 2AI-6A+ 详情图 3AI-6A+ 详情图 4AI-6A+ 详情图 5AI-6A+ 详情图 6AI-6A+ 详情图 7AI-6A+ 详情图 8AI-6A+ 详情图 9AI-6A+ 详情图 10AI-6A+ 详情图 11AI-6A+ 详情图 12

为 AI-6A+ 询价

发送数量、目的地与时间要求——我们会在一个工作日内回复报价。

咨询问题

也可以看看

系列中的其他机型

AI-5 Pro 光纤熔接机 — 入门级 · 安防与短距离 FTTH

入门级 · 安防与短距离 FTTH

AI-5 Pro

安防、CCTV 与短距离 FTTH

  • 8 s熔接
  • Core对准
  • 5200 mAh电池
规格
AI-9 光纤熔接机 — 主力机型 · 中长途干线

主力机型 · 中长途干线

AI-9

中长途干线

  • 5 s熔接
  • Core对准
  • 7800 mAh电池
规格
AI-12 光纤熔接机 — 高精度 · 长途干线

高精度 · 长途干线

AI-12

长途干线与 G.654 跨段

  • 6 s熔接
  • 0.05 µm对准
  • 7800 mAh电池
规格

对比全系列 →