

旗舰机型 · 长途骨干施工
AI-30 光纤熔接机
长途骨干施工的旗舰机型:0.05 µm 对准、内置电动切割刀、光通量辅助对准,完整的测试功能集成在 3.09 kg 机身中。
- 熔接 / 加热
- 6 s / 15 s
- 对准
- 0.05 µm
- 测试
- OPM + VFL
- 保修
- 5 年(电池与适配器 1 年)
所有设备均按项目单独报价。本站不设在线支付环节——开票前我们会先确认价格、交期与运输方案。
下载用户手册- 长途骨干网
- 电信工程施工
- 城域核心网
- 应急抢修
旗舰级对准
0.05 µm 纤芯对准配合光通量辅助,用于熔接损耗预算最紧的骨干线路。
一箱到底的现场套装
电动切割刀、OPM 与 VFL 全部集成,工程队带一个箱子出门,而不是四台仪表。
为长线路而生
7800 mAh 电池约 240 次熔接加热循环,3.09 kg 的机身适应偏远地区的立杆、沟槽与架空作业。
五年保修
整机五年保修,电池与适配器保修一年。
技术规格
AI-30 技术参数
10 种语言. 以上数值为厂家标准机型的规格参数。
Basic parameters
| Fiber alignment | Core/cladding; real-time luminous flux assisted alignment (only applicable to environments with a stable optical signal link from the front) |
|---|---|
| Motor number | 6 motors (fiber alignment accuracy: 0.05µm) |
| Splicing time | 6s |
| Heating mode | 15s, can be customised according to the external environment |
| Fiber type | Single-mode fiber (SMF/G.652, BIF/G.657); suitable for single-mode, multi-mode, bare fiber, tail fiber, drop cable, jumper and invisible optical fiber |
| Cladding diameter | 80-150µm |
| Splicing loss | 0.02dB (SM) / 0.01dB (MM) / 0.04dB (DS/NZDS) |
| Splicing mode | Automatic focusing core alignment, conventional / high precision splicing |
| Splicing way | Automatic, semi-automatic, manual |
| Fiber cleaver | High precision delay-return electric one-step fiber cleaver |
| Visual fault locator | Power: 15mW, 2Hz flashing and steady-on mode |
| Optical power meter | Wavelength: 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm / 980nm / 1270nm / 1577nm / 1650nm; measuring range -50+30dBm, absolute error <0.3dB (-50dBm ~ +3dBm range) |
| Fusion splicer languages | 10 languages (Chinese, Russian, English, French, Italian, Thai, Portuguese, Spanish, Arabic, Polish) |
| Fiber holder | Three in one fixture, no need to change, suitable for single/multi-mode, multi-core cable/bare fiber, tail fiber, jumper, leather cable |
| Battery capacity | 7800mAh large-capacity lithium battery, charging time ≤3.5 hours; continuously welds and heats about 240 cores |
| Magnification | 320x (X or Y axis single display), 200x (X and Y axis dual display) |
| Fiber diameter | Coating diameter: 80-150µm / Coating diameter: 100-1000µm |
| Cutting length | Coating layer 250µm below: 8-16mm / coating layer 250-1000µm: 16mm |
| Heat shrink tube | 60mm / 50mm / 40mm / 25mm |
| Tensile testing | Standard 2N |
| Display | 5 inch TFT color display screen |
| Boot time | 1s, boot can enter the working mode |
| Data is stored | Unlimited, machine storage 1000 groups, the excess part can be stored in the server, can export data. |
| Wireless communication | Based on bluetooth 4.2 protocol standard, the working band is 2.4GHz, the maximum transmission range is 60m |
| Software upgrade | Mobile phone APP Internet update, enable Bluetooth synchronization upgrade machine software |
| Management function | The equipment owner can be bound as the highest authority, and can remotely view the welding records, welding time, loss, etc. through the mobile phone APP. The number of welding times or working time of the equipment can be set. The manager can effectively manage a single or multiple equipment. |
| Return loss | Better than 60dB |
| Product protection | Waterproof, dustproof and fall proof |
| Power supply | Input AC100-240V 50/60Hz, output DC13.5V/4.8A, the current power mode can be identified, real-time monitoring of the current battery level |
| The work environment | Temperature: -15 ~ +50°C, humidity: < 95%RH (no condensation), working altitude: 0 ~ 5000m, maximum wind speed: ≤15m/s |
标准配置
箱内清单
- 主机(含电池与内置切割刀)
- 工具包:剥线钳、米勒钳、酒精瓶
- 备用电极与电弧校准光纤
- 电源适配器与背带
- 带配件袋的肩包
- 用户手册、质量合格证、保修卡
电极、切割刀片等耗材可作为备件供应。告知我们你的年熔接量,我们会在报价中配好相应数量。




















为 AI-30 询价
发送数量、目的地与时间要求——我们会在一个工作日内回复报价。


